- 18 -
Setting up the Station mode
If you are connected to a network router that uses Dynamic
Host Configuration Protocol (DHCP), which most networks
do, you do not need to set up your router. Please follow up
the setting as below
1.
Please plug the AC adapter into the Hub.
2.
Check the Power LED (green). It should be illuminated.
3.
Plug the Ethernet cable into the Hub (only needed for
configuration of the USB-Hub).
4.
Plug the other side of the Ethernet cable into the socket
of your PC.
5.
Open your preferred Internet browser and enter the IP
address of the Hub in the address bar. Press
Enter
.
NOTE: the IP address of the Hub is displayed in the
Control Utility (See page 21).
