Medion E85029 MD 87119 Скачать руководство пользователя страница 8

Страница: 8 / 81

9 / 81

• Keep the plastic packaging out of

the reach of children as it can cause
suffocation!

• Always follow the user instructions of

the devices that you connect to the Wi-Fi
repeater.

• Do not place liquid-filled containers,

such as vases, on or near the device. The
container may tip over and the liquid may
impair the electrical safety of the device.

• Keep the device away from moisture and

from water in droplet or spray form. Avoid
knocks, dust, heat and direct sunlight
in order to prevent malfunction. The
operating temperature is 5-35° C.

• Never open the housing of the device. This

invalidates the warranty and may render
the device unusable.

• Do not modify the device without our

consent.

• the socket-outlet shall be installed

near the equipment and shall be easily
accessible

87119 UK Aldi Content Final rev5.indd 9

25.08.2014 14:44:48

Содержание E85029 MD 87119


















































































Результаты поиска

Содержание E85029 MD 87119

Отзывы:

Бренды по названию

Популярные бренды

Medion E85029 MD 87119, Инструкция по эксплуатации

Результаты поиска

Содержание E85029 MD 87119

Отзывы:

Бренды по названию

Популярные бренды