Medion E85029 MD 87119 Скачать руководство пользователя | Manualshive

Страница: 79 / 81

background image

80 / 81

8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new
versions of the General Public License from time to time. Such new
versions will be similar in spirit to the present version, but may differ
in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the
Program specifies a version number of this License which applies
to it and “any later version”, you have the option of following the
terms and conditions either of that version or of any later version
published by the Free Software Foundation. If the Program does
not specify a version number of this License, you may choose any
version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the
author to ask for permission. For software which is copyrighted
by the Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this. Our decision
will be guided by the two goals of preserving the free status of all
derivatives of our free software and of promoting the sharing and
reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE
IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED
BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING
THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE
PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

87119 UK Aldi Content Final rev5.indd 80

87119 UK Aldi Content Final rev5.indd 80

25.08.2014 14:44:57

25.08.2014 14:44:57

«
...
77
78
79
80
81
»

Содержание E85029 MD 87119


















































































Отзывы:

Нет отзывов

Похожие инструкции для E85029 MD 87119

Бренд: MPM Страницы: 24

Бренд: Jata electro Страницы: 16

Бренд: Hamilton Beach Страницы: 36

Бренд: Hamilton Beach Страницы: 20

Бренд: Sage Страницы: 20

Suprex SPX-7400 Series

Бренд: Cypress Страницы: 18

Бренд: camry Страницы: 72

Бренд: Extron electronics Страницы: 29

Бренд: Happy Baby Страницы: 9

Бренд: Amplitec Страницы: 13

Бренд: Audio Authority Страницы: 12

Бренд: AICOOK Страницы: 9

Бренд: Gefen Страницы: 20

Бренд: Key Digital Страницы: 13

Бренд: Patton electronics Страницы: 53

Бренд: KitchenAid Страницы: 3

Бренд: KitchenAid Страницы: 8

Бренд: KitchenAid Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды