Medion Akoya E54005, Инструкция по эксплуатации

Страница: 47 / 152

Operating elements
12
Operating elements
(Ill.: Front operating elements)
Ref. Button Description

You will start the OSD (On Screen Display) with this button. Press this button
again if you wish to leave the OSD.
+ Power block, when the OSD is not activated
+ OSD block, when the OSD is not activated
Hold the key combination until the bar displayed has moved from left to
right completely, to activate/de-activate the block. A corresponding message
will appear on the screen.

Select a parameter and reduce its value with this button, when the OSD is
switched on.
If you are not in the OSD: Direct call-up of the Contrast / Brightness menu.

Select a parameter and increase its value with this button, when the OSD is
switched on.
If you are not in the OSD: Direct call-up of the OptiColor Mode menu.

Confirm the selection of the parameter to be changed with this button.
If you are not in the OSD: Direct call-up of the Automatic adjustment .

Operational display Shows the operational state.

You can switch the TFT monitor on or to the Standby mode with this button.