Medion AKOYA E4214, Руководство пользователя

Страница: 44 / 86

Hard Disc Drive Mounting Bracket
Your notebook is fitted with an extra hard disc drive mounting bracket.
Safety Information
− Switch off your notebook before you remove your hard disc
drive mounting bracket.
− Never leave your notebook unattended without the extra hard
disc drive mounting bracket to ensure that no objects fall into
the uncovered slot and damage the notebook.
− After replacing, make sure that the extra hard disc drive is
correctly inserted.
Inserting a Hard Disc Drive into the Extra Hard Disc Drive Mounting
Bracket
Proceed as follows:
− Switch off the notebook by shutting it down correctly, disconnect the
notebook from the power supply and remove all connecting cables.
− Turn the notebook over and place it on a stable and level surface to avoid
dropping it.
− Remove the screw on the underside of the notebook and pull the hard
disc drive mounting bracket out of the bay.
− Push a hard disc drive into the hard disc drive mounting bracket and
secure the hard disc drive in the hard disc drive bay using the screws
supplied.
− Push the hard disc drive mounting bracket into the bay and replace the
screw on the underside of the notebook.
− Start up your notebook and perform a reboot.
If it has already been formatted or contains data, the extra hard disc drive will
be recognised and connected up by the operating system.
NOTICE!
− Only use 2.5” hard disc drives with a height of 7mm.
AUS
1300 884 987
AUS
AFTER SALES SUPPORT
www.medion.com.au
43
Hard Disc Drive Mounting Bracket
99570 E4214 Aldi AUS Content MSN 4005 4640 RC1.indb 43 99570 E4214 Aldi AUS Content MSN 4005 4640 RC1.indb 43 23.04.2015 14:59:00 23.04.2015 14:59:00