11
FILTER REPLACEMENT
LIGHT INDICATOR TO REPLACE THE FILTER
The indicator light will remind users when it is time to change your filter.
1. Remove all existing filters from the unit. Remove all
packaging from new filter sets. Then, install the new
filters into the unit in the same order as existing filters.
Turn off and pull out power plug before replacing the filters. If replacement filter indicator light
flashes again after replacement, press the reset button at the side (as shown) until indicator
light resets itself.
ATTENTION
2. Install new filter sets in the unit. Reinstall side covers,
as outlined earlier. Side covers will snap back in
automatically.
3. When filter replacement is complete, plug in unit and
turn on. Press the Ionizer button for 3 seconds to reset
the unit.