4
IMPORTANT:
An inspection of your Shuttle System should be completed
once every 6 months. If any fault is found that could provide a hazard to
either the occupier of the operator, then the system should not be used
until the fault has been repaired. A competent person who preferably
has experience of this type of product should carry out the service. The
growth and any changes of the occupant since the original assessment
should also be taken into account when servicing this product.
•
Regularly inspect and maintain your Shuttle System to ensure all locking devices and moving parts are working properly�
•
Ensure that all bolts that attach the seat together are tightened and secure at all times�
•
Always keep your Shuttle System clean� If you have been to the beach, completely clean the stroller afterwards to remove the
sand and salt from the mechanisms and wheel assemblies�
•
Fabric covers can be wiped clean using warm water and a mild detergent�
•
Aluminium and plastic surfaces should be wiped or scrubbed clean�
MAINTENANCE
Date
Service Performed
Signature Print Name
The table below has been provided for recording relevant data from inspections.
WARNING!
If you discover any bolts missing or parts worn – replace immediately – don't delay!!
WARNING!
Medifab will not be held responsible for incorrect use of this product.
