The appliance automatically stores the result for up to a maximum of 60 measurements. When
this limit has been reached, the new results progressively replace the previous ones. The stored
data can be displayed complete with date and time.
During measurement, you can press the “START” button to turn off the monitor manually.
Repeating the measurement.
Switch the appliance off, then simply press the “START” push button to start another
measurement.
Wait at least three minutes before the next measurement.
Calling up stored results.
With the appliance off, press the MEM key to start the memory data call-up mode.
Each time the MEM key is pressed, the recorded measurements are displayed.
If the voice function has been activated, the appliance will say the memory position number and
the values stored.
If no measurement has been recorded, “00” will appear on the display as the memory position
number and “0” will appear as the recorded value.
To cancel the saved data, press the MEM key and hold it pressed for about 3 seconds until the
appliance emits three beeps.
The display will appear first as shown in fig. 4 and then as shown in fig. 5.
fig.4
fig.5
Содержание KD-5904
Страница 57: ......
