CONTROLLERS
1
2
3
4
5
6
1
2
3
4
5
First you should tightly connect controller to the mat connector and
only after this plug-in controller into the power outlet. Then turn ON
controller with toggle switch.
Controller also has a temperature dial to completely adjust the heat
in 1°C increments from 86 °F to 158 °F, displayed in Celsius from
30 °C to 70 °C. Sometimes we call the different temperatures “levels”.
Level 1 is 86-98 °F or 30-36 °C (Lowest mode, reveals crystals’ powers
and brings negative ions and other vital natural forces into your home while
you are seeking rest and mental clarity, great to sleep or relax).*
Level 2 is 98-110 °F or 36-43 °C (Low mode, provides a comfortable
setting for all night restful sleep to manage an occasional sleeplessness,
improve absentmindedness, relieve tiredness, and maintain proper
immune function).*
Level 3 is 110-120 °F or 43-49 °C (Low medium mode, great to
create maximum relaxation and immunity support environment, helpful
to maintain healthy heart, inspired and invigorated mind, improve look
of your skin).*
Level 4 is 120-133 °F or 49-56 °C (Medium mode, use as a part
of your dietary and healthy routine to maintain cholesterol and sugar
levels already within the normal range, alleviate the occasional blue
feeling everyone experiences from time to time).*
Level 5 is 133-145 °F or 56-63 °C (Medium High mode, may be helpful
for healthy lifestyle to alleviate occasional constipation, promote
sexual arousal and performance, relieve temporary water-weight gain
and mild mood changes bringing you back to normal condition).*
Level 6 is 145-158 °F or 63-70 °C (High mode, envelop yourself with
pleasant warmth of natural crystals and gemstones. Together with exercise
patterns it may encourage activity, contribute to spiritual balance, feeling
happy, cleansing, sweating, well-being and better overall health).*
Level 7 is 158 °F or 70 °C (Highest mode, use with extra care to create
maximum soothing environment important for proper muscles and joints
function, optimal strength and flexibility, stress and tension reduction).
The temperatures reflect the temperature of the inner heating
elements, not the surface of the mat, which can be 10-20 °F lower (or
even lower than this) if the mat is not covered with a thick blanket.
Usually, if the ambient temperature is around 70 °F, it takes between a
half an hour to hour for the mat to reach the maximum level (158 °F,
or 70 °C) if covered it with a thick blanket.
Controller L-40N-B
for Classic mats, pads and belts:
1
Power ON/OFF Switch Button
– Push it to turn mat
ON/OFF. Controller Temperature display
will show
OF
until you activate the TIMER
.
2
Temperature Display
– Shows the current temperature
in Celsius (
30-70 °C
), flashes to the set temperature,
then back again.
3
Timer Control Toggle Button
– Select 3, 6 or 12 hour
heating session with auto shut-off when time expires.
Timer should be activated first to start heating. Be
sure to use only the lowest heat setting when sleeping
on the mat.
4
Timer ON Indicators
– Light ON when Timer is used,
shows the number of hours the mat is set to function.
5
Adjust Temperature Dial
– Use to increase or decrease
heat 30~70 °C (86~158 °F).
Controller H-40N / H-60N
for Classic mats, pads and belts:
1
Power ON/OFF Toggle Button
– Push it to turn the mat ON/OFF.
If H-40N controller is used, when you turn it ON, the display
will
show
0H
– it is the default heating mode with 12 hours auto shut-off
or it can show blinking lines
--
if so, please, activate the Timer and
set session time. If static lines
--
are displayed, please press power
button again with some effort so that lines
--
start to blink on the
display
showing that the controller is ON and ready to choose the
session time and temperature. If H-60N controller is used, Power
ON indicator
lights up when the Power button is pressed and the
power is ON. Display
may also show
ON
. You can set the session
time and temperature.
2
Timer Control Toggle Button
– Select one of 4 options shown on the
Temperature/Timer display
:
1H, 4H, 8H
or
0H
for 1, 4, 8 or 12
hours heating session with auto shut-off when time expires
(H-40N)
.
H-60N
may have one more setting
-H
for generating ions without any
heating.
3
Temperature and Timer Display
– Switches into Temperature Mode
when the Temperature Dial
is rotated. Display shows the current
temperature in Celsius (
30-70 °C
), flashes to the set temperature,
then back again. When the temperature is set above 122 °F (50 °C)
on
H-60N controller
or above 105 °F (40 °C) on
H-40N controller
for longer than 3.5 hours, auto protection feature of
H-60N
controller
decreases it to safe 113 °F (45 °C) level.
H-40N controller
decreases temperature to 105 °F (40 °C). When auto safety feature
is active display shows
[ ]
. When the heating program is over the
temperature display will show
--
indicating that Power is ON.
In Timer mode Display shows one of 4 time settings
1H, 4H, 8H
or
0H
chosen by Timer Control Button
. It may show
OF
or
--
when
the time setting is over or if connection between the controller and
the mat is lost. Reconnect or add time to resume heating or push
the Power Button
to turn-off the Controller.
(please, check point 12, page 5 for details)
4
Power ON Indicator
(only H-60N)
– Lights up when the power ON.
5
WARM Operation Indicator
– ON when mat is heating, OFF when
set temperature is reached.
6
Adjust Temperature Dial
– Use to increase or decrease heat
30~70 °C (86~158 °F). The dial range is marked, indicating the
desired temperature in °F.
Controllers H-40N and H-60N can
be differentiated by the
power ON
indicator
available on H-60N
but not available on H-40N
®
www.MediCrystal.com
3
Содержание Classic Amethyst Mat
Страница 1: ......
