Blanket Warmer Operating Manual
9
FRONT PANEL COMMANDS
HOW TO SEE THE SET POINT TEMPERATURE
1. Push and immediately release the SET key. The set point will be shown.
2. The set point temperature displays for 5 seconds or push the SET to return
to the normal display.
HOW TO CHANGE SET POINT TEMPERATURE
1. Press the SET key for more than 2 seconds to change the set point value.
2. The value of the set point temperature will be displayed and the ° C or ° F
LED starts blinking
.
3. You can now raise or lower temperature with
▲ or ▼ keys.
4. After you set your desired temperature, push the SET key again or wait 10
seconds.
Note: You cannot increase the set point temperature higher than the maximum
temperature it was originally set to with the above procedure (150 ° F)
HOW TO LOCK / UNLOCK THE KEYBOARD
To LOCK the keyboard, press for more than 3 seconds both the
▲ and ▼ keys.
The
“OF” message will be displayed and the keyboard will be locked.
To UNLOCK the keyboard, press for more than 3 seconds both the
▲ and ▼
until the
“ON” message is displayed.
