Medicare Technology ENIGMA ENERGI+ Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 22

Medicare Technology ENIGMA ENERGI+ Скачать руководство пользователя страница 13

Enigma Energi Owners Handbook

Page 13 of 22

Part Code: Z20942

BATTERY CHARGING

CONNECTING THE BATTERIES,
MOTORS AND JOYSTICK

All electrical parts
connect through the VR2
power module mounted to
the side of the
powerchair.

Connect the powerchair
up following the wiring
diagram on the right.

CHARGING THE BATTERIES

The batteries require charging on a regular basis to minimise the risk of you
being stranded due to the batteries being flat. Ideally, you should charge the
batteries whenever the powerchair is not in use to make sure that there is always
the maximum available range for the powerchair.

The information gauge supplied on the joystick displays the amount of charge
left in the batteries. This gauge however should only be used as an approximate
guide. The battery is at full charge when all the lights are lit and the number of
lights lit will reduce once power is used.

When the leftmost red LED starts flashing, recharge the powerchair batteries as
soon as possible, as this is a warning that the powerchair is running low on
power.

To charge the batteries:

•

Turn off the powerchair

•

Insert the round plug from the charger into the joystick and switch the
charger on. The charging socket is located at the front of the joystick unit.

•

Charge the batteries for at least 12 hours for maximum capacity

MOTOR 2

MOTOR 1

24V BATTERY
SUPPLY

JOYSTICK
CONTROL

VR2 POWER MODULE

BATTERY

CHARGER

«
...
11
12
13
14
15
...
»

Содержание ENIGMA ENERGI+























Отзывы:

Нет отзывов