Medicap REVOCERY, Инструкция по эксплуатации

Страница: 35 / 76

3 4 1 2
7 8 5 6
EN
CLEANING
Make sure there is
no capsule inside the
machine.
Place a large bowl under
the dispenser (C) to col -
lect the descaling diluted
and lime residues.
Fill the watertank with
water to maximum level
mixed with descaling
solution, make sure the
solution is dissolved com -
pletely.
Turn off the main switch
(I), press the (K1) button
and hold it pressed
down.
DESCALING
• Drinking water varies according to region. The lime particles in hard drinking water are deposited
as residues in the machine and can block the piping and cause damage. To prevent this, be sure to
descaling the machine at the very least after making 300 to 400 cups of functional products or, in
any case if the output falls significantly or, after one or two months.
• Descaling must be done correctly to prevent damage. So it is essential to follow these instructions.
IMPORTANT
• Never turn the machine off during this process.
• Never clean the machine with vinegar. This causes damage and makes your beverage taste bad.
• Damage caused by incorrect descaling or failure to descaling is not covered by the guarantee.
• Caution: beware of hot water and steam! Risk of scalding!
• Recommendations: purchase commercially available decalcifier (descaling liquid), diluted
according to the manufacturer‘s instructions.
Turn the main switch
(I) simultaneously on,
release the button (K1)
when you hear two beep
sounds. The light will be
red.
Push the button (K1) to
start the pump. The ma -
chine needs two full tanks
of the descaling solution
for the process. After
emptying the first tank
you can hear a single beep
sound which reminds you
to fill the tank again.
Fill it with water and
descaling solution to the
max line.
Push the button again
and the machine will
begin the process.
RECOVERY WWW.MEDICAP-NUTRITION.COM 35