Medical Solutions 6000 Series, Руководство оператора, Страница: 6 / 11

5640.A 6
Documentor
™
Resetting Instructions
TO CHANGE THE DATE:
1. Plug Documentor™ into an electrical outlet.
2. Press and hold blue RESET button located on the bottom of the Documentor
™
.
3. While holding down the RESET button, press and hold the • right button on the front
panel.
4. While holding the • right button, release the RESET button.
5. When Prog appears in the display, release the • right button, Prog finishes.
6. Tap the • right button again. The display will show 0000 and the 1
st
digit will flash.
7. Tap the left button until the number 8 appears then Tap the • right button twice so the
third 0 is flashing.
8. Tap the left button until the number 8 appears in the third position then Tap the
• Right button.
9.
Tap the left button until the number 8 appears in the fourth position. The display
should read 8088 then Tap the • right button.
10. When the display flashes all four digits, Tap the • right button
11. The display flashes P1(date).
12. Tap the • right button, the small digits on the left, representing the year, will flash.
13. Tap the left button until the desired number appears then Tap the • right button. The
digits representing the month should flash.
14. Tap the left button until the desired number appears then Tap the • right button. The
digits representing the day should flash.
15. Tap the left button until the desired number appears then Tap the • right button.
16. When the desired date is set Tap the • right button until the display flashes P1 (date).
17. Tap the blue RESET to return to the standard display.
TO CHANGE THE TIME:
18. Follow steps 1-11.
19. Tap the left button, when the display flashes P2 cloc, Tap the • right button.
20. The hour format will flash (12 or 24). If necessary, tap the left button until 24 flashes.
Tap the • right button
21. The hour digits will flash; Tap the left button until the desired setting is achieved. (the
hour must be set in military time 3:05 pm = 15:05) Tap the • right button
22. The minutes digits will flash; Tap the left button until the desired setting is achieved.
Tap the • right button twice.
23. The display will flash P2 Cloc, Press and release the blue RESET button.