Mediblink M540 AFib, Инструкция по эксплуатации

Страница: 10 / 60

10
EN
The setting procedure as follows:
It is essential to set date and time. Otherwise, you will not be able to save your
measured value correctly with a date and time.
To use
“ ”
button to be adjustment button,
If you press and hold
“ ” button, you can set the values more quickly.
1. Year setting: the year flashes on the display: choose the desired
year with “” button and confirm with “
”
(ON/OFF) button.
2. Month setting: the month flashes on the display: choose the desired
month with
“ ”
button and confirm with “
”
(ON/OFF) button.
3. Day setting: the day flashes on the display: choose the desired
day with
“ ”
button and confirm with “
”
(ON/OFF) button.
4. Hour setting: the hour flashes on the display: choose the
desired hour with
“ ”
button and confirm with “
”
(ON/OFF)
button.
5. Minute setting: the minute flashes on the display: choose the
desired measurement unit with
“ ”
button and confirm with “
”
(ON/OFF) button.
Please be noticed, the clock will begin to run from 2016-01-01 01:01, and Unit in
mmHg, if no key is pressed within 20 seconds.
5. Carrying Out a Measurement
5.1 Before the measurement

Avoid eating, smoking as well as all forms of exertion directly before the
measurement. All these factors influence the measurement result. Try and
find time to relax by sitting in an armchair in a quite atmosphere for about ten
minutes before the measurement.

Measure always on the same arm (normally left).

Attempt to carry out the measurements regularly at the same time of day, since
the blood-pressure changes during the course of the day.