[email protected],time=2013-11-28 11:59:39,ip=58.250.71.129,doctitle=MT7612-EEPROM Content v1_02_guideline.pdf,company=Synnex Electronics HK Limited 聯強電子_RLT
MT7612
EEPROM Content
Confidential B
MediaTek Confidential
© 2013 MediaTek Inc.
Page 29 of 32
This document contains information that is proprietary to MediaTek Inc.
Unauthorized reproduction or disclosure of this information in whole or in part is strictly prohibited.
2.35 USB String Descriptor Index (0x1D6h~0x1DFh)
Offset
Field
Description
1D6h
7:0
USB descriptor string index (high byte part) : It’s the string start address high
byte part , for example, the string index start address is 0x0200, the 0x02 is the
string index head, the low byte will indicate on 0x1D7h~0x1DFh
1D7h~1DEh
7:0
The USB string index low byte part, it concates with 0x1D6h to indicate the
string address in EEPROM.
It provides 8 string index fields. Customer can update USB string on
EEPROM’s empty field (0x140~0x1BF is prefered field) and modify the string
start address on these string descriptor index.
For example :
At EEPROM 0x120 has one String (“802.11n WLAN”) , it should be:
1E 30 38 00 30 00 32 00 2E 00 31 00 31 00 20 00
6E 00 20 00 57 00 4C 00 41 00 4E 00
“1E” is the string length, “30” is the String type , then each two bytes indicate
the unitcode of each character.
And please update 0x1D6h = 0x01 , 0x1D7h = 0x40 to indicate the string
index.
2.36 2G/5G Temperature Compensation Enable/Disable
(0x36,0x43,0x55)
There are 3 EEPROM setting needs to be configured for temperature compensation. Main purpose is
for ePAiPA RFCR switch, BB CR switch, RF re-cal of IC performance variation over temperature.
1. 0x36 bit1 :
i.
1: enable TC for TX PA power setting
ii.
0 : disable TC for TX PA power setting
2. 0x43 bit3 :
i.
0 :enable TC for BB/RF CR switch
ii.
1 : disable TC for BB/RF CR switch setting
3. 0x55 bit7
i.
1: enable temperature sensor value
ii.
0 : disable temperature sensor value
4. 0x55 bit[6:0]
MEDIATEK CONFIDENTIAL
FOR danielwu@ synnex.com.tw USE ONLY
