37
36
2. Basic Fuctions
2. Basic Fuctions
2.1. Power supply and charge
2.1.1. Power supply
There are three types of supplying power: battery, adaptor, USB cable. GPS navigator uses the Li-
battery to supply power when it is not connected with adaptor. The mark
on the up right of
interface indicate the current electric volume.
• GPS navigator uses the external power when it is connected with the motorcycle.
• GPS navigator uses the USB cable to supply power when the GPS connects to the PC.
Remark: This machine adopt built-in, unchangeable Lithium battery. At normal condition
(if the back light is not so bright), the actual supply hour can be different because of the
different way using the navigator. Some function (audio playing, video playing, bright back
light) will consume a large power, which will reduce the using hour.
Note: This machine adopts built-in, unchangeable Lithium battery. In
order to avoid fire and burning, please do not poke, bump or take it
apart or throw it into fire or water.
2.1.2. Use the car charger to supply power
• Connect the DC part with the motorcycle, the red line is connected with ignition switch and the
black line is connected with the negative pole, when you turn on the motorcycle, the GPS navigator
will turn on automatically.
• The other part connect to the power socket, it supplies power while charging.
2.2. Power on/off
2.2.1. Power on
Please check: The battery is enough, or it is connected to external power source;
Note: If bring the unit form one place to another place, please boot
until it adapts to the environment. Big humidity fluctuation will make
the mainframe short circuited.
2.2.2. Power off
Press the button on the top of the unit to turn off, the unit will enter the power saving mode and
maintain the last operation status when boot next time.
2.3. Reset system
If the system cannot work, you can reset the system by the following way:
• Click the reset key on the right part of the machine to reset the system by using the stylus.
• Relative information: it can be no response in the following condition:
• The shift between pictures is delayed or stopped.
• The program select function cannot work normally, such as long time to carry out or cannot be
activated.
• The power button can not work.
Note: The unsaved data will be lost as you reset the system when the
system has no response. Please copy the data every other time.
2.4. Use bracket to fix navigator
When use GPS in the motorcycle, you should fix the device
to the part of the motorcycle besides the panel by using
the bracket.
2. Basic Fuctions
