LinkIt 2523 HDK v11 User's Guide
© 2015 - 2016 MediaTek Inc.
Page 6 of 82
This document contains information that is proprietary to MediaTek Inc. (“MediaTek”) and/or its licensor(s).
Any unauthorized use, reproduction or disclosure of this document in whole or in part is strictly prohibited.
2.2.
Downloading the project image using the LinkIt 2523 HDK as a
removable storage
To update the FreeRTOS image only (example project image:
iot_sdk_demo.bin
) use the LinkIt 2523 HDK as a
removable disk drive according to the following steps:
1)
Connect the LinkIt 2523 HDK to your PC with a micro-USB cable to the
MK20 USB
connector.
2)
Navigate to
Computer
on your PC to check if a new mass storage named
MT2523
is available
under
Devices with Removable Storage
, as shown in Figure 7.
Figure 7. LinkIt 2523 HDK connected as removable disk storage
3)
Open the
MT2523
removable storage, then drag and drop the project image, such as
iot_sdk_demo.bin,
from the original image folder to update the image on the HDK’s flash.
