MediaSonic MS9400 HD FrEND, Руководство пользователя

Страница: 29 / 64

MS9400 HD FrEND User Guide Chapter 4: RS232 (Serial) Port Event Scheduler
29 Rev. 1.54
<Event>
…
</Event>
Using a Text Editor of your choice, enter command lines as illustrated in the Event Script Format above.
NOTE: Characters are not case sensitive.
Events
The script file can contain more than one event.
Each event must be bracketed with the <Event> </Event> tags
Start Date
The Start Date uses the following format: Month/Day/Year.
The start date must be bracketed with the <StartDate> </StartDate> tags.
End Date
The End Date uses the following format: Month/Day/Year.
The end date must be bracketed with the <EndDate> </EndDate> tags.
Day of Week
The Day of Week contains seven locations (one per day of the week: Sun,Mon,Tue,Wed,Thu,Fri,Sat) separated by
commas. Assign a ‘1’ to the day location for the required event, otherwise assign a ‘0’.
The Day of Week must be bracketed with the < DayofWeek > </ DayofWeek > tags.
Event Time
The Event Time uses the following format: Hour:Minute:Second.
The end date must be bracketed with the <EventTime> </EventTime> tags
Command String
The Command String contains the text string defined by the Remote Control Protocols. To transmit a string out of
the serial port to an external device, use the “
outport ” protocol.
NOTE: If required by the external device, a terminating character is placed in the [#] sub tag. The scheduler
supports both Line Feed and Carriage Return 0A (LF) and 0D (CR) codes.
The Command String must be bracketed with the < CommandString > </ CommandString > tags.
NOTE: Any of the MS9400 Remote Control Protocol commands may be used in the Command String code line.
For example:
<CommandString>Load Playlist 1 “playlistname”</CommandString> .
Refer to Chapter 6: Remote Control Protocols for a list of supported commands.