MediaSonic MS9000, Руководство пользователя

Страница: 41 / 121

HD Player Chapter 5: HD Player Configuration
39 Rev. 6.4
Set the channel to loop at startup
This option determines the state of the auto-repeat (loop) function at HD Player power on. Select this option by
clicking the box. The HD Player will be set in auto-repeat mode at the end of the currently playing clip.
Set the channel to start playing at startup
This option instructs the HD Player to play a file when it is first powered on. When the option is selected the clip
that was in use when the configuration file was last saved will play at startup. For more information please refer to
the Configuration files section of this manual.
Video on at startup
Select this option to enable HD Video output when the HD Player is powered on. This option will usually be set,
but can be useful in certain show control environments.
Audio on at startup
Select this option to enable the HD audio output when the HD Player is powered on. This option will usually be
set, but can be useful in certain show control environments.
Output black when file completes
Select this option to set the HD Player video output to black whenever a clip completes. This is useful for theater
style applications, where the MPEG clip may end on a bright picture, which would stay on the screen until the
next play command is sent. A black output will avoid any possible “burn in” problems on certain display devices.