manualshive.com logo in svg

MediaSonic MS9000, Руководство пользователя

Поделиться
Скачать
MediaSonic MS9000 Скачать руководство пользователя страница 111

HD Player 

 

Index 

 

  

109

 

Rev. 6.4 

 

Switzerland. Tel: 011-41-22-717-2221. Fax: 011-41-22-717-2481.  

Email: 

mailto:[email protected]

. 

 

Internet: 

www.ebu.ch

.  

Ethernet (IEEE 
802.3):

 

A type of high-speed network for interconnecting computing devices. Ethernet 
can be either 10 or 100 Mbps (Fast Ethernet). Ethernet is a trademark of Xerox 
Corporation, Inc. 

Grand Alliance

 

The United States grouping, formed in May 1993, to produce "the best of the 
best" initially proposed HDTV systems. The participants are: AT&T, General 
Instrument Corporation, Massachusetts Institute of Technology, Philips 
Consumer Electronics, David Sarnoff Research Center, Thomson Consumer 
Electronics and Zenith Electronics Corporation.  
The format proposed is known as the ATSC format.  
S

ee also: ATSC. 

 

Group of 
pictures 

In an MPEG signal the GOP is a group of frames between successive I frames, 
the others being P and/or B frames. In the widest used application, television 
transmission, the GOP is typically 12 frames but this can vary-a new sequence 
starting with an I frame may be generated if there is a big change at the input, 
such as a cut. If desired, SMPTE timecode data can be added to this layer for the 
first picture in a GOP.  

HDTV 

High Definition Television. The 1,125-, 1,080- and 1,035-line interlace and 720 
and 1,080-line progressive formats in a 16:9 aspect ratio. Officially a format is 
high definition if it has at least twice the horizontal and vertical resolution of the 
standard signal being used. There is a debate as to whether 480-line progressive 
is also high definition. It is the opinion of MediaSonic that that 480-line 
progressive is not an HDTV format, but does provide better resolution than 480-
line interlace, making it an enhanced definition format.  

Huffman coding 

This compresses data by assigning short codes to frequently occurring sequences 
and longer ones to those less frequent. Assignments are held in a Huffman 
Table. The more likely a sequence is to occur the shorter will be the code that 
replaces it. It is widely used in video compression systems where it often 
contributes a 2:1 reduction in data. 

I frames 

One of the three types of frames that are used in MPEG-2 coded signals. These 
contain data to construct a whole picture and are composed of information from 
a single frame (intraframe). The original information is compressed using DCT.  
S

ee also: B frames, P frames, MPEG. 

 

Interframe 
coding 

Data reduction based on coding the differences between a prediction of the data 
and the actual data. Motion compensated prediction is typically used, based on 
reference frames in the past and the future.  

Interlaced

 

Short for interlaced scanning. Also called line interlace. A system of video 
scanning whereby the odd- and even-numbered lines of a picture are transmitted 
consecutively as two separate interleaved fields. Interlace is a form of 
compression.  

Intraframe 
Coding 

Video coding within a frame of a video signal 

ITU-R BT.601-2: 

Formerly known as CCIR 601. This international standard defines the encoding 
parameters of digital television for studios. It is the international standard for 
digitizing component television video in both 525 and 625 line systems and is 
derived from the SMPTE RP125. ITU-R 601 deals with both color difference 
(Y, R-Y, B-Y) and RGB video, and defines sampling systems, RGB/Y, R-Y, B-

Содержание MS9000


























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды