Additional information and notes I Technical specification
GB
Connecting the device to an USB 3.0 port
This device is designed for computers and laptops with Windows or Mac operating systems
and must be connected to a USB 3.0 host port for optimal performance. Furthermore the
device is bus-powered via the USB 3.0 data cable and does not require an external power
supply when connected to an USB 3.0 port.
Connecting the device to an USB 2.0 port
This device is downwards compatible to USB 2.0 ports. Please be aware that the
performance will be much slower by using an USB 2.0 port. In order to use this device
properly, it might be neccessary to connect it to an USB hub with external power supply.
Note: Using the external device with devices other than computers that support USB may lead to errors or may
not work at all. Please check the details of each device first before connecting to make sure that the external
drive is supported. Furthermore, please be infmorend that the external HDD might be not compatible and
detected, to devices other than computers, because of the default NTFS file system.
Default file system
This device is formatted with one partition and uses the NTFS file system by default. This file
system allows you to use the device perfectly with Windows operating systems.
Note: If the device is formatted with a different file system, the compatibility to the operating system and
computers will be affected. Before formatting, please check which file system is required for your demands.
Technical specification
Support service
If you have any problems or questions about our products, please do not hesitate to contact
MediaRange Support Service:
Tel.: +49 (0) 6196 523 81 80
or E-Mail:
Disposal of Used Electronic Equipment
This device is subject to the European Directive 2012/19/EG. All electrical
devices and used electrical equipment must be disposed of separately from household waste over the appropriate
government agencies. Proper disposal of old electronic equipment helps avoid environmental damage.
All brands and product names referenced in this user manual are property of their respective owners and
reffered to for descriptive purposes only.
Item no.
MR995
MR996
Capacity
500 GB
*
Model
external hard disk drive
File system
NTFS formatted, single partition
Data transfer
rate
up to 5 GBit/s
**
up to 5 GBit/s
**
HDD type
2.5“ (6.35cm) I 5.400 rpm I 8 MB Cache
Connection
USB 3.0; downwards compatible
Compatibility
Windows 7 or higher; Mac OS 10.5 or later
Size I Weight
122.8 x 76.2 x 13.2 mm I approx. 175g
1 TB
*
(1.000 GB)
Note: To improve products performance, the content of
this user manual may be revised without prior notice.
* 1 GB = 1 billion bytes. Actual capacity of device may be up
to 10% less.
** Device must be connected to USB 3.0 host port for
optimal performance. Read and write performance depends
on computer capabilities and file size. (e.g. a computer with
HDD has a limited performance which will lower the
performance of this device significantly.) The data transfer
rate performance is based on a USB 3.0 connection at UASP
modus.
