Top
Getting Started
Installation Check List
Task
Verified by Date
Network information available and recorded in site log.
Location requirements verified.
Site power Voltage.
Installation site pre-power check completed.
Mounting tools and equipment available.
Additional equipment available.
Mediatrix unit received.
Regulatory compliance and safety information received.
Software version verified
Rack, desktop mounting of chassis completed.
Initial electrical connections established.
Cable length limits verified.
Initial configuration performed.
Initial operation verified.
Top
Package Check List
Item
Condition
1 Mediatrix unit
1 power cord with the proper model for the country
1 Bumpon kit for desktop use
1 printed flyer
1 black RJ-45 cable for each PRI and BRI port
1 grey Ethernet RJ-45 cable
Top
Cleaning Instructions
To clean a Mediatrix unit, wipe with a soft dry cloth.
Caution: Do not use volatile liquids such as benzine and thinner as they can damage the unit's casing.
For resistant markings, wet a cloth with a mild detergent, wring well and then wipe off. Use a dry cloth to dry the surface.
Top
Mounting Tools and Equipment
Tools
Screwdriver as required for attaching brackets to rack
ESD wrist strap
Earth ground cable
Warning: The earth ground cable should be the same size (18 AWG minimum) as the earth cable of the provided power cord. Otherwise, make
sure the earth ground cable meets the standards and requirements of your local electrical code. The type of the cable is likely to have VW-1 or
RT1 markings on the cable.
Equipement
RJ-45 cables for the WAN and LAN connections
RJ-45 cable for PRI and BRI connections
RJ-11 cable for telephony connections
Top
Connectors and Indicators
Note: The Mediatrix Sentinel 100 is highly customizable in the sense that it may have one or several types of cards, or none. Therefore the following
images may not exactly represent your Mediatrix unit.
