<
Operation
How to start cleaning
Assemble the docking station and switch on
the adapter. The signal lamp on the docking
station should start to flash.
Note:
Place the docking station close to a wall
and remove obstacles approx. 1 m on both sides
and approx. 2 m in front of the device.
1
Switch on the power supply. The display
should now flash.
The robot vacuum cleaner switches to sleep
mode if it does not receive any commands
within 16 seconds.
Note:
A.
Make sure that the power switch is always
turned on, as the robot cannot be put into
operation otherwise.
B.
The selected mode is stopped if the power
switch is turned off.
Attention:
Make sure that the power switch is
turned on before charging the robot, as the
robot cannot charge otherwise.
2
Automatic charging
The robot automatically returns to the docking
station when the battery is low.
4
Charge the robot in a scenario as shown
below:
A.
Connect the plug to a socket.
B.
Press the HOME button to send the robot
back to the docking station for charging.
To extend battery life:
A.
Charge the robot overnight before using it for
the first time. The display field disappears when
charging is complete.
B.
During normal use, always return the robot to
the docking station, which is connected to the
power supply.
C.
Fully charge the robot, then turn off the
power switch and place the robot in a cool, dry
place if you will not use it for a longer period.
3
Start
|
Pause
|
Sleep
The robot vacuum cleaner is not in operation.
The LED display on the clean button is turned
off and the power switch is on.
Sleep Mode
The robot vacuum cleaner is not in operation. The LED display on the clean button is illuminated.
Cleaning Mode
The robot vacuum cleaner is not in operation.
The LED display on the clean button flashes.
Selected Mode
1. Commissioning
A.
Make sure that the power switch is turned on.
B.
Press the CLEAN button on the main unit or the remote control to start cleaning.
Note:
When the robot is in sleep mode, press the robot’s CLEAN button to wake it
up. The robot will immediately start cleaning if you press the CLEAN button a
second time.
2. Pause
Press the CLEAN button on the main unit or the remote control to switch the robot
mom cleaning mode to the selected mode.
Note:
If you have paused the robot, press the CLEAN button to restart cleaning.
3. Sleep
To switch the robot from the selected mode to sleep mode:
A.
Press and hold the CLEAN button on the main unit for three seconds.
B.
The robot automatically switches to sleep mode if it does not receive a
command within 15 seconds.
9
10