Quick Start Instruction
…………………………………………..…………………………….
Important Information
…………………………………………………………………………..
Safety instructions
…………………………………………………..………………………….
Components
…………………………………………………………………………………………
Operation
………………………………………………………………..………………………….
Cleaning and maintenance
…………………………………………………………………
Trouble shooting
………………………………………………………..………………………
Specifications
……………………………………………………………..………………………
Appendix-Operating instructions
………………………………..……………………..
Page 1
Page 3
Page 4
Page 5
Page 9
Page 14
Page 16
Page 18
Page 19
QUICK-START INSTRUCTIONS
Please remove the EVA
protection stopper
before using.
Clear the area to be
cleaned. Remove power
cords and small objects
from the floor, tuck rug
fringe under the rug
base, and lift items such
as curtains and
tablecloth off the floor
Under Mopping, please
pay attention to the
robot, add water or
clean up water tank in
time.
Seal the water inlet
cover well, otherwise
the water will release
too fast from the water
tank.
Do not charge the
robot under MOP
mode. And the robot
will not response to the
"Auto recharge" if you
press this button on the
remote controller.
Do not use MOP
function on the carpet.
Turn the power switch,
"1" to ON, "0" to OFF
IMPORTANT INSTRUCTIONS OF
FUNCTIONING
IMPORTANT INSTRUCTIONS
BEFORE USE
Direct Charge by
Adapter plug in the
robot charge hole.
Put the robot onto the
charge dock, make
sure the charge pins in
well contact, connect
the Adapter with the
charge dock and then
connect to the power
supply.
Note: The robot will
only response to
"Clean" button on
robot and "Start/Stop"
button on remote
controller when it
under charging. Any
other buttons will not
response and show up
the voice "Wrong
instruction".
IF THERE ARE ANY FAULTS SHOW UP,
PLEASE RESTART THE ROBOT AFTER THE
FAULT IS SOLVED.
TWO WAYS TO CHARGE
Table Of Contents
1
2