MediaGate USA Inc. 13
Zest and push
“Output” Key. You can cycle through the TV modes to get the
correct display.
3. Wait few seconds for the start up page to show up, and it will turns into the Main Menu
Afterwards.
4. The start up page will last for only few seconds, and then go to a black screen. Please
wait few seconds and it will enter into the Main Menu. If there is still no video output after
the start up page appears, please make sure the MG-800HD and the TV are in the same
mode. If not, please cycle through the
“Output” key on the remote control, wait
few seconds during each cycle.
Note:
When you cycle through the “Output” Key, the MG-800HD will tell you which mode
you are at. Below is an example of cycling to “HDMI” mode. Please press “OK” if HDMI
mode is what you want to select. It will switch to the original mode automatically if idle for
15 seconds.
Fig 1-4 Start Up Page
