Media KW5262, Руководство пользователя, Страница: 30 / 45

VDSL Router User Manual
28
IP address
This is the IP address that other devices on your local network
will use to connect to the modem.
Subnet mask
This defines the size of your network. The default is
255.255.255.0 .
Disable / Enable
DHCP server
The DHCP server assigns an IP addresses from a pre-set pool of
addresses upon request from DHCP client (e.g. your computer).
Do not disable the DHCP server unless you wish to let another
device handle IP address issuance on the local network.
Start / end IP
address
This is the beginning and ending range for the DHCP server
addresses.
Lease time
The amount of time before the IP address is refreshed by the
DHCP server.
Enable DHCP
server relay
If NAT is disabled and the PVC is the IPoA or static MER type,
this item allows you to inform the router of another DHCP server
on your LAN. To do this, disable the DHCP server on the
gateway. Then input the IP address of the current DHCP server.
Click Apply and restart the gateway.
Configure the
second IP
address and...
Select this option to let the device use a second IP address on
the LAN interface. You can also use this second IP address to
access the device for management. Enter the LAN IP address of
your device in dotted decimal notation, for example, 10.0.0.1.
Type the subnet mask.
Note: If you want to cancel all modification that you do on the Router, please
select from “Management

Setting

Restore Default Settings” to restore
factory default settings.