Copyright Media Technologies 1999 - 2008
Page 9 of 19
To adjust the fine position of an individual monitor, click on an individual monitor as shown below
and adjust the image position using the horizontal and vertical sliders.
The image may temporarily lose synchronisation if individual monitor alignment is adjusted too far
horizontally. Restore synchronisation by moving the slider back into range.
IMPORTANT
When you have finished aligning the image, click “Save” at the left side to ensure the
processor registers these values on power-up.
Repeat this procedure for each split (e.g. 2x2, 3x3) you wish to use. Each split configuration has
independent storage in flash. Exception is individual monitor alignment which is fixed independent
of the split.
You can adjust vertical and horizontal split values independently, for example an anamorphic 6x4
split can be adjusted by selecting X-split = 6 and Y-split = 4.
A test pattern can be displayed, but this feature is currently only suitable for square 4:3 arrays.
Future updates will support test patterns for 16:9 array formats.
