medemagroup Mini Crosser X1 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 64

medemagroup Mini Crosser X1 Скачать руководство пользователя страница 40

User guide 1533-2001-B

40 of 64

Version 2.0.0 - 2021

Medema A/S

Push the disengagement lever down to

disengage (only hand brake works) and

push up to reactivate the motor (normal

driving now possible).

Disengagement

Manual

The manual disengagement lever is placed underneath the

back cover. Follow this procedure to use it.

• Turn the key to (0) position.

•

Push the disengagement lever down.

The motor brake is now disengaged and the vehicle can be

pushed or towed, but not drive itself.

Electronic

The yellow electronic disengagement button is placed on the

back of the vehicle. This only works when the scooter is turned

on.

NOTE!

Don’t ever disengage on sloping terrain.

If the brake is somehow disengaged on a slope/hill, the Mini

Crosser will brake automatically when it reaches a certain

speed. There is an electric safety feature in the control system,

which works even if the battery is disconnected. This is also the

reason why the Mini Crosser cannot be towed at more than 5

km/h. See the section about towing.

Once the motor brake has been disengaged, the Mini

Crosser can only be stopped with the hand brake.

Disengagement lever

«
...
38
39
40
41
42
...
»

Содержание Mini Crosser X1

































































Отзывы:

Нет отзывов