medemagroup Mini Crosser X1 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 64

medemagroup Mini Crosser X1 Скачать руководство пользователя страница 24

User guide 1533-2001-B

24 of 64

Version 2.0.0 - 2021

Medema A/S

Up a ramp/hill

•

There is a risk of tipping over backwards if the seat is pushed

back when you start driving up a slope, e.g. a ramp.

•

Pull the seat forward! Check that any ramp is stable.

•

Lean forwards.

•

Accelerate moderately so that your vehicle can overcome the

obstacle. Do not stop halfway. Reduce speed once the vehicle is

up. If you need to start on a hill, accelerate slowly so as not to tip

over backwards.

•

Avoid many starts / stops when driving on steep hills. It can over

-

heat the Mini Crosser.

Down a ramp/hill

• Check that any ramp is stable.

• Lean back.

•

Drive slowly down. Avoid stopping midway on short, steep slopes.

On long hills, it is advisable to stop every now and again if you

feel your speed is getting too high.

Warning!

Be aware that the stopping distance can be significantly longer,

down hill, than on level ground.

«
...
22
23
24
25
26
...
»

Содержание Mini Crosser X1

































































Отзывы:

Нет отзывов