Quick guide P9-0152-Q
6 of 24
Version 2.0.1/2017
Medema Production A/S
User menu
Term
Description
Menu / information
Press the button and a menu at the top of the display switches
between ”Date”, ”Time”, ”Complete km”, ”Complete running
time”, ”Battery Voltage” Service ”and” inclination ”.”Slope” is
optional, and appears only if it is engaged.
Button Menu / information are also used to modify the
user parameters. Access these parameters by holding the
menu button for approx. 3 sec.
Key switch
To start the vehicle:
Turn the key to position (1). When the ignition key is turned
to drive position (1), the display lights up. The Scooter can
drive within approx. 1 second. The first half second after the
Mini Crosser is on, the control is making a safety check of the
electrical system. If the accelerator is affected during this time,
the Mini Crosser will not be able to run, before the key again
has been turned at 0 and back to 1 again.
Speed selector
The turtle indicates lowest speed range. 0-6 km / h.
The hare indicates the highest speed range. Up to 15
km / h. Increase/decrease with + / - button.
The icons turtle/hare can be turned on/off from the
User menu.
Battery indicator
The left side of the display shows battery level indicator.
Indicates that after approx. ½ seconds, the battery state of
charge. Provides a more accurate indication after approx. 1
minute drive. When both red, yellow and green box lights are the
batteries fully charged. Can be divided into 10 or 3 boxes. When
the view is down the bottom of the yellow batteries should be
recharged as soon as possible. If there is only light in the red boxes
or fl ashing the batteries must be charged immediately.
Trip meter
TRIP button resets the trip meter. Can be used while
driving.
