Quick guide P9-0152-Q
14 of 24
Version 2.0.1/2017
Medema Production A/S
Driving the Mini Crosser M2 Cabin
Getting in and out
It is important to learn a safe technique for getting in and out of the Mini
Crosser.
In general the following method should be followed:
•
Make sure that the Mini Crosser M2
Cabin
is off (switch turned to 0) when
getting in and out, otherwise the Mini Crosser could start if the accelerator was
touched inadvertently.
•
Make sure that the brake is on. (Lever for disengaging motor in top position.)
•
Put the steering column in vertical position.
•
If necessary, raise the armrest.
Note! - Do NOT use the dors as support, when entering or getting out of the
vehicle.
IMPORTANT!
The Mini Crosser will turn itself off automatically after it has been stationary
for 10 minutes even if the key has been turned to driving position.
To restart the vehicle, the key must be turned to stop position (0) and then
to driving position (1).
