medemagroup Mini Crosser M-MaxX, Руководство пользователя

Страница: 31 / 52

1 2 3 4
User guide P9-0135-B 31 of 52 Version 1.0.3/2012
Medema Production A/S
Fuses
The Mini Crosser has the following protection systems:
• Automatic overload protection, which limits the current to the
motor. This protection is integral to the control system and cannot
be adjusted. It prevents both the control system and the motor
from being overloaded. In the event of overload the current to the
motor is reduced - full speed and traction can be resumed after
the motor has cooled down for 2-5 minutes.
• The control fuse protects against mains faults. It is located under
the rear cover.
• The main fuse protects against short-circuits in the main current
circuit. The fuses are located under the rear cover behind the
batteries. Fuse type DIN 2581 - 150a.
• If the ignition key is turned at the same time as the accelerator is
operated, the vehicle will not move off for safety reasons.
• The lights and horn are protected by electronic fuses, which
protect against any short-circuiting that may occur. To prevent
accidental short-circuiting when a bulb is changed, the Mini
Crosser must be turned off when the new bulb is fi tted and then
turned on again afterwards.
1. Fuse 40A - charges
2. Fuse 10A - power
3. Extra fuse 10A - not used
4. Extra fuse 10A - not used Main fuse 150 A. Located on each page
under the battery cover, behind the
batteries.