Connection Procedure
1. Place the kick on the floor in the center of the rack as
shown.
2. Place the hi-hat pedal on the floor on your left side.
3. Connect the pads to the drum module with the marked
cables.
Are you ready? Let's enjoy playing it.
Make connections as shown in the illustration.
4
Connect the Pads to the Drum Module
DD514_G05
Attach the Drum Module
1
2
1. Connect the cable to the drum module as shown with
handscrews.
2. Attach the drum module to the mount holders on Side
Arm (L1), and firmly tighten the relevant wing nut.
Note:
Adjust the drum module position by moving the mount
holders as needed, and firmly tighten the relevant wing
nut.
Ride
Crash 1
Hi-Hat
Drum Module
Snare
Tom 4
Hi-Hat Control
Kick
Tom 1
Tom 2
Tom 3
Crash 2
Crash 1
Ride
Hi-Hat
Drum
Module
Snare
Tom3
Tom4
Tom1
Tom2
Kick
Hi-Hat
Pedal
T
om 4
Crash 2
