VC4003-MC
Page 2
Installation and Operations manual
Medallion Series MC 418 MHz VIBRA-CALL 3 Receiver and Docking Port
Model # VC4003-MC
General
The Vibra-Call 3 is a body worn battery operated alerting device that includes the Vibra-Call 3 Docking Port equipped
with battery backup. It can be used with any Silent Call Medallion Series MC 418 MHz transmitter. The transmitters
available are the Sound Monitor, Telephone, Doorbell, Smoke Detector, CO Detector, Fire Alarm Transmitter,
Door/Window Access, Weather, and Pressure Sensitive Door or Bed Mat.
Installation
Installing the Vibra-Call 3 receiver and Docking Port consists of locating it where it can be seen most effectively for
the user. If using the optional Bed Vibrator or Strobe Light then place the Docking Port on a table or night stand
near your bed.
Plug the power supply into the DC barrel type female jack on the back of the Docking port (See locations
below) and then into any standard household 120v AC outlet.
Turn the power switch to the on position.
If using the optional Bed Vibrator or Strobe Light, then plug those into the corresponding locations on the
back of the Docking Port.
Charging/Operation
You will need to charge your Vibra-Call 3 receiver for 8 hours prior to the first use.
Place the receiver into the Docking port. (If using the Leather Pouch you must remove it before placing the
receiver into the Docking Port. If using the optional Rubber Skin you can leave that on the receiver when
placing into the Docking Port.)
The Receiver will vibrate to let you know that it has been placed into the Docking port properly.
When the receiver is in the Docking port and detects a signal from a Medallion Series MC 418 MHz
transmitter with a matching coding system, it activates the Docking Port’s optional bed vibrator and/or
strobe light.
The vibrator or strobe light will continue for approximately 15 seconds after the transmitted signal ceases
except in the case of fire. As long as the Smoke Detector and/or Fire Alarm Transmitters continue to send
an alert signal, the Vibra-Call 3 receivers alerting mechanisms will remain on.
The Vibra-Call 3 has 6 different vibration alerts to tell you which type transmitted signal were sent; Sound,
Phone, Door, Weather, CO and Fire.
During the day, take the Vibra-Call 3 receiver out of the Docking Port and clip it to your belt using the
provided leather pouch or place the unit into your pocket.