15
APPENDIX---
BUILT-IN AIR PERIMETER MATTRESS
MODEL # CZ42-BIP & CZ48-BIP
THESE MODELS COME WITH A BUILT-IN AIR PERIMETER
PLEASE CHECK THE BACK OF THE PUMP FOR CORRECT MODEL NUMBER.
The built in air perimeters are located on both the left & right side of the mattress.
This prevents the patient’s arms and legs from getting caught in between the air mattress
and side rail. It also acts as an aid to prevent the patient from falling out of bed.
Please note however that the perimeter is not intended to be a guaranteed protection against falling.
Patient must be under the constant watch of a caregiver to monitor the patient’s movements.
When the patient needs to transfer out of bed, each side can be deflated individually to allow the patient easy access. To
deflate the air perimeter, simply slide open the cover and disconnect the air tubes. Each side can be deflated independently
and inflated again when you re-connect the air tube.
HOW TO INFLATE & DEFLATE THE SIDE AIR PERIMETERS:
Connect the tubes to inflate the perimeter
Cover the tubes with the integrated cover
Disconnect to deflate the perimeter
when connected to protect the tubes
Tubes are located at the head and foot of the mattress
Press on the blue tab to disconnect the tubes
© 2014
MADE IN CHINA