18
Telephone: 0161 429 7330 www.tensmachineuk.com
CHOOSING THE CORRECT PARAMETERS
IN MANUAL ADJUSTMENT MODE
With all muscle stimulators, it is important that the frequency, pulse width and
work rest times are set correctly, to both maximise the results and use the device
in a safe and responsible manner.
Frequency Selection
5-15Hz (pulse per second)
This frequency range would be selected to improve tone and muscle stability.
15-25Hz (pulse per second)
The range of frequencies helps to promote muscle endurance and conditioning.
25-50Hz (pulse per second)
This frequency range would be selected for muscle strengthening and muscle
bulk.
50-120Hz (pulse per second)
This range of frequency is used for strengthening, re-education and spasticity.
Using higher frequencies 50Hz plus requires only short periods of treatment time
as muscle fatigue will occur very quickly.
Pulse width selection
The pulse width selection is dependent on the depth of penetration and targeted
muscle group. For example, the more superficial the muscle the lower the pulse
width; see examples below:
Hand / foot muscles 80µs – 100µs
AB Abdominal muscles 80µs – 100µs
Leg muscles 250µs – 300µs
Arm muscles 150µs – 250µs
For strengthening protocols of all large muscle groups 300µs may be best
