SONNET audio processor
11
To use the telecoil proceed as follows:
• Activate the telecoil by pressing the key
T
(only signals picked up by the telecoil will be
audible) or
MT
(signals picked up by the microphone and the telecoil will be audible) on
your FineTuner as described in chapter 4, SONNET audio processor, FineTuner, FineTuner
controls.
• When you are using a telephone, position the telephone so that its earpiece is centred
over the SONNET control unit. Move the telephone slightly up or down as necessary to
optimize the signal quality.
• When you are in an environment with a loop system, try to find a spot where the signal
quality is best for you.
• To deactivate the telecoil when you do not need it anymore, press the key
M
on your
FineTuner as described in chapter 4, SONNET audio processor, FineTuner, FineTuner
controls.
When you switch on the audio processor, the microphone is active even if you had the
telecoil selected before you switched off the audio processor. When the telecoil is active,
you may hear buzzing sounds when operating a FineTuner key. The buzzing is normal and
indicates that a command is being sent. To reduce interference with various electronic and
electrical equipment when the telecoil is active, we recommend you reduce audio sensitivity
(see chapter 4, SONNET audio processor, FineTuner, FineTuner controls).
