MecPower Tecway Kiddie Pirate, Руководство пользователя

Страница: 12 / 29

12
WARNING ： It must be placed on the flat floor to meke the machine on the
ground steadily.
5.2 CHECK AND SET BEFORE CONNECTING THE POWER
1) Please check whether the parts of cabinet are loose caused by moving,
and the wire terminal should not drop out from the port.
2) Check whether the GND is connected.
3) Please check whether the resistance of power input at the both ends for
GND is more than 100 megohm.
4) Connect the wires.
Attention
A
Pleasemake sure the power cord is not pressed by wheel, foundation,
etc. Otherwise, it will damage the wire to cause short circuit, even fire.
Do not use strong power to extend and wring the wires. Do not make
the wire be near to the high temperature object. Properly put the wire
to avoid any kicking or treading.
B
Hold the plug to pull it out from the socket. Do not touch the plug with
AA
AA