MecPower Tecway Kiddie Firemen, Руководство по эксплуатации

Страница: 16 / 18

15 15 15 15
8.2 ADJUST THE SQUIRT COORDINATE
1)
Press “TEST” on the setting board to enter into the game setting menu
→
press the “TEST” to select “Potentiometer Test”
→
press “ENTER” to enter
setting.
2)
Test if the left and right potentiometer and up and down potentiometer is
working properly.
（
refer to above setting
descriptions
）
3) If all
potentiometers are working properly but the squirt coordinate is not
accurate, please select “P1 coordinate correction” to correct it
.
4) When the coordinate at t
he upper left corner
, move the squirt gun to
the far left and topside, then press start button to confirm the upper
left corner’s correction. Then it will skip to bottom left corner’s
correction.
5) Bottom left corner’s correction method is the same as upper left
corner’s correction. When
the squirt coordinates is adjusted accurate,
press “TEST” button to exit.
电 位 器 测 试
P1左 右 电 位 器 :218
P1上 下 电 位 器 :98
P1屏 幕 坐 标 校 正
退 出 电 位 器 测 试 :YES
移 动 水 枪 1到 瞄 准 点 位 置 ， 按 下 开 始 键