MECNOSUD SP100, Инструкция по эксплуатации

Страница: 8 / 35

8
observance or non-respect of instructions s for installation, use and maintenance contained in this manual.
1.7.1 POWDERS RISK
During the loading operations of the dry products in the bowl or during the normal working some hanged
dusts can be determined (for example flour dust).
The ingredients and the packaged products must be handled with care, reducing at minimum the height over
the bowl from which they are poured.
The packages must be opened with care in the bowl inferior part to promote the flour dust release in the less
possible time.
During the flour loading and during the machine functioning normal cycle, a suction centralized system
must be prepared and functioning, placed in the machine superior part.
In any case, against the residual risk due to the lacked functioning of the suction system, the operator and
the maintenance man besides to be adequately informed and trained, every time that approach in the working
zones, must use respiratory ways protection devices, as for example anti dust respiratory masks or other
suitable devices.
Besides, the working must be immediately interrupted and the internal maintenance service must be activated
to function the suction system.
The same individual protection devices must be used from the operator and from the maintenance man when
perform the machine cleaning operations.
1.7.2 SAFETY DEVICES
The machine is equipped with the following safety devices:
Safety guard which prevents access to the bowl during the work process
Emergency stop button
A microswitch which acts by stopping the machine during operation if the safety grill is lifted
Safety guard for the electrical system
1.8 SERVICE AND SPARE PARTS
For questions on service and spare parts please contact your local dealer and state the following information
(see data plate):
•
Type of machine
•
Year of production
•
Reference number of the required piece as indicated in the drawing enclosed).
Use only genuine spare parts.
1.9 DEMOLITION OF THE MACHINE
In case of dismantling and demolition of the machine, the pieces which the machine is made of, do not present
any kind of danger that necessitates any particular caution. To facilitate the recycling process, you must
separate the different parts according to material type and provide the scrapping in compliance with the
existing laws and regulations.