page 4
Connecting-up
Check voltage selected is correct.
The required power supply voltage (110-120V or 220-240V)
is indicated by the value shown in the black panel within
the fuse cartridge housing. Your local Mecmesin
representative will already have checked that the fuse
cartridge has been installed correctly for the supply voltage
of your country.
It is possible to modify your Vortex
-d
for operation in a
country with a different supply voltage by: turning off the
power, removing the fuse cartridge housing, checking that
both fuses are fitted, rotating the cartridge through 180°,
then reassembling and reinstalling.
The new voltage rating will now be displayed in the black
panel.
Connect your Vortex-
d
to an appropriate mains supply; turn
on the power switch at the bottom of the Mains Inlet
Connector and the display will illuminate indicating
“Vortex-
d
.”
Using the
Vortex-
d
Mains Inlet Connector
Front Panel Control
The front control panel of the Vortex-
d
is designed with a
digital display for ease-of-use.
