page 3
Please refer to the test stand image shown on page 10 for
further guidance.
• Slide the AFTI swivel mounting bracket (G) onto one of
the pillars.
• Tighten the central adjuster knob (C) to secure.
• Slacken off the side adjuster knobs (B).
• Ensure that the loading dish (A) is facing upwards and,
the central adjuster knob (C) faces forward (as illustrated)
• Align the holes in the crosshead with the pillars of the
base unit, and ensuring that the crosshead remains
horizontal, gently slide the crosshead down onto the
pillars.
• Tighten both side adjuster knobs (B).
The system is now ready to install any extra components
which have been purchased:
• Using an appropriate Allen key, attach a ‘smart’ static
torque transducer to the transducer holding plate (D)
using the four M6 bolts supplied.
• Attach an AFTI to the swivel mounting bracket (G) using
the two M5 bolts supplied.
• Connect the static torque transducer cable to the AFTI
and Static Torque Transducer.
• If the lower mounting plate option has been supplied,
attach the lower mounting plate to the lower platen
turntable spacer (F) using the 4 M4 countersunk screws
supplied.
• If the upper mounting plate option has been supplied, fit
the upper mounting plate onto the square drive of the
torque transducer and secure with the two grub screws
located in the mounting plate.
Installing the
Machine
