14
Write down the username and password for one of your user accounts.
6)
When you have entered the correct username and password, the "connection" window will close
automatically.
7)
The console will connect to Spykee:
> Spykee’s Webcam image will appear on the console’s screen and the connection icon will now be green.
> It will make a "Gling Gling Gling!” sound and its lights will flash slowly.
> This means that you are now connected!
If Spykee does not connect and/or the image is not displayed:
> Check your computer is correctly connected to your robot’s WiFi network
2
then launch the console again.
> If it still doesn’t work, please refer to the "Help" chapter at the end of this manual;
8)
Now please go to the following chapter to configure your console and/or robot. It is very important to do so
at the first use; do not omit these steps.
1
For more information refer to Chapter II, Section 10.4 "CONFIGURING YOUR ROBOT / User accounts Tab"
2
See Part 7 of this Chapter.
