7- SAFETY WARNINGS
Before the machine is operating, read the Use and Maintenance manual thoroughly, so that you are
fully aware of all the operating controls and safety aspects of the machine.
Before starting the engine , be sure that the SAFETY DEVICES are well working and fitting.
Without these cares the operator might work in a danger situation.
DON’T SABOTAGE THE ENGINE STOP’ SAFETY DEVICE AND THE DISENGAGEMENT
DEVICE. THE MACHINE MIGHT BECOME EXTREMELY DANGEROUS!
1) This machine has been designed and manufactured for being used by one operator only, and is driven by
means of the appropriate handlebars. Any other use is not permitted.!
2) Before operating the machine, read the Use and Maintenance manual thoroughly, so that you are fully aware of all
the operating controls and safety aspects of the machine.
3) Do not under any circumstances transport people or objects on the machine.
4) Always ensure that the machine’s safety devices are correctly mounted and in perfect working condition..
5) Before use, check that all the controls, in particular the clutch, the Motor stop and the brakes (if fitted9are in good
working order.
6) Any modification or spurious parts being fitted without the Manufacturer consent will nullify the guarantee, and any
possible resulting damage will not answered for.
7) This machine must not be used by children or inexperienced persons.
8) Before operating the machine, check that the area is clear and free of debris and that there are no people within the
working area (danger zone). The operator, will be held responsible for the safety of third parties, if these are found
within the working area of the machine. Do not use the machine under these conditions.
9) Keep clear of cutting blades at all times while the machine is in operation. Pay particular attention when reversing;
keep hands and feet clear.
10) Use the machine only with the handles in the correct working position. This allows a safe working distance
between the operator and operating area.
11) Use only original accessories and spare parts to guarantee safety and correct operation of the machine.
12) Stop engine before refuelling and remove ignition key (if fitted).
13) Handle the fuel with care to avoid spilling on the machine; clean any spillage immediately.
14) Never refuel in confined places, in vicinity of open flames or near the source of sparks. No smoking!
15) Before starting the engine, check that all the controls are in the idle position.
16) Do not smoke when starting the engine!
- 3 -