Page 9
Mcro19 - Operator’s Manual
August 2021
Secton 4 - Hazards
Fall & Collision Hazards
Fall Hazards
Art_2826
Art_2825
DO NOT sit, stand or climb on the platform guard rails. Maintain a firm footing
on the platform floor at all times.
DO NOT exit the platform when elevated. DO NOT climb down from the
platform when elevated.
Keep the platform floor clear of debris.
DO NOT fasten a fall restraint lanyard to an adjacent structure.
Ensure that the platform entry is properly closed and secured before operating
the machine.
Ensure that the guard rails are properly installed and in good condition before
operating the machine.
Operators must comply with employer and job site rules and governmental
regulations regarding the use of personal protective equipment.
Collision Hazards
Art_2835
Art_2829
Art_2827
Check path before moving for equipment, materials or other obstructions.
Check path before moving for overhead obstructions.
Check path before moving for crushing hazards when holding the platform rail.
Be aware of limited sight distance and blind spots when driving or operating.
Be aware of extended platform position(s) when moving the machine.
Observe and use color-coded direction arrows on the platform controls and
platform decal plate for drive and steer functions.
Reduce travel speed when moving the machine on slopes, when near
personnel and obstacles, or when surface conditions are wet, slippery or
otherwise limiting.
DO NOT operate in the path of any crane unless the controls of the crane have
been locked out and/or precautions have been taken to prevent any possible
collision.
Stunt driving and horseplay are PROHIBITED.
Watch for personnel and obstructions below the platform when lowering the
platform.
Keep hands and limbs out of scissors.
Use common sense and planning when operating the machine with the
controller from the ground. Maintain safe distances between the operator, the
machine and fixed objects.
