Mec 6092RT Скачать руководство пользователя страница 38

Страница: 38 / 44

Page 36

93808 – October 2014

6092RT

Warning and Instructional Decals

Serial Plate Location

The serial plate is attached to the machine at the time of manufacture. Important information
about the machine is recorded on the serial plate.

Serial Plate Description

MFG DATE.

Month / Year of manufacture

MODEL NUMBER.

Identifies the machine.

SERIAL NUMBER.

Identifies a machine with reference to its original owner. Refer to the

number when requesting information or ordering parts.

MAX. WIND SPEED.

The maximum safe wind speed at which the machine can be elevated.

MAX. PLATFORM CAPACITY INCLUDING PERSONS.

The maximum safe load (persons

+ equipment) which can be evenly distributed on the platform at any elevation

MAX. ALLOWABLE MANUAL FORCE.

The maximum safe force that the occupant can

exert laterally on an object outside the platform.

MAX. PLATFORM HEIGHT.

The maximum attainable height measured from level ground

surface to platform floor.

MAX. DRIVE HEIGHT.

The maximum safe platform height at which the machine can be

driven.

MAX. LOAD PER WHEEL.

The maximum safe weight applied to each wheel. Calculated

with all available options installed.
Fw = 30% (Wm + Wc + Wopt)

MAX. GROUND PRESSURE PER WHEEL.

The amount of pressure exerted on the surface

at each wheel. Calculated with all available options installed.
Pmax = 30% (Wm + Wc + Wopt) / Contact Area

STANDARD MACHINE WEIGHT.

The weight of the machine with no options.

OPTIONAL EQUIPMENT ADDS TO STANDARD MACHINE WEIGHT.

The weight of

installed optional equipment.

ART_4701

Содержание 6092RT













































Результаты поиска

Содержание 6092RT

Отзывы:

Похожие инструкции для 6092RT

Бренды по названию

Популярные бренды

Mec 6092RT, Руководство оператора

Результаты поиска

Содержание 6092RT

Отзывы:

Похожие инструкции для 6092RT

Бренды по названию

Популярные бренды