Page 23
XX69RT Series - Service & Parts Manual
November 2022
Section 6 - Maintenance
3. Lift the safety arm, move it to the center of the scissor arm and rotate up to a vertical position.
4. Lower the platform until the safety arm rests securely on the link. Keep clear of the safety arm
when lowering the platform.
Crushing hazard. Keep hands clear of the safety arm when lowering the
platform.
5. While raising the platform from the ground controls, push in the roller of the up limit switch to
activate the limit switch.
• Result:
The platform stops rising. The machine is functioning properly.
• Result:
The platform continues to rise. Adjust or replace the up limit switch.
6. Raise the platform and rotate the safety arm to the home position.
7. Lower the platform to the stowed position.
B-10 Perform Engine Maintenance
• Tools will be required to perform this procedure.
• New parts will be required to perform this procedure.
• A cold engine is required before performing this procedure.
Engine specifications require that this procedure be performed every 400 hours.
Required maintenance procedures and additional engine information is available in the engine
operator’s manual.
Содержание 3369RT
