Page 14
XX69RT Series - Service & Parts Manual
November 2022
Section 6 - Maintenance
Daily Checklist
The following maintenance should be done every day or 8 hours of operation.
A-1 Inspect the Manuals and Decals
Maintaining the operator’s manual in good condition is essential to safe machine operation. Manuals
are included with each machine and should be stored in the container provided in the platform. An
illegible or missing manual will not provide the safety and operational information necessary for a safe
operating condition.
In addition, maintaining all of the safety and instructional decals in good condition is mandatory
for safe machine operation. Decals alert operators and personnel to the many possible hazards
associated with using this machine. They also provide users with operation and maintenance
information. An illegible decal will fail to alert personnel of a procedure or hazard and could result in
unsafe operating conditions.
1. Check to make sure that the operator’s manual is present and complete in the storage container
on the platform.
2. Examine the pages of manual to be sure that they are legible and in good condition.
• Result:
The operator’s manual is appropriate for the machine and the manual are legible and
in good condition.
• Result:
The operator’s manual is not appropriate for the machine or the manual is not in
good condition or is illegible. Remove the machine from service until the manual is replaced.
3. Open the operator’s manual to the decals inspection section. Carefully and thoroughly inspect all
decals on the machine for legibility and damage.
• Result:
The machine is equipped with all required decals, and all decals are legible and in
good condition.
• Result:
The machine is not equipped with all required decals, or one or more decals are
illegible or in poor condition. Remove the machine from service until the decals are replaced.
4. Always return the manual to the storage container after use.
A-2 Perform Pre-Operation Inspection
Completing a Pre-Operation Inspection is essential to safe machine operation. The Pre-Operation
Inspection is a visual inspection performed by the operator prior to each work shift. The inspection
is designed to discover if anything is apparently wrong with a machine before the operator performs
the function tests. The Pre-Operation Inspection also serves to determine if routine maintenance
procedures are required.
Complete information to perform this procedure is available in the appropriate operator’s manual.
Refer to the Operator’s Manual on your machine.
A-3 Check the Battery
• New parts will be required to perform this procedure.
Proper battery condition is essential to good machine performance and operational safety. Improper
fluid levels or damaged cables and connections can result in component damage and hazardous
conditions.
Содержание 3369RT
