manualshive.com logo in svg

Mec 3072ES, Руководство по обслуживанию и запасным частям

Поделиться
Скачать
Mec 3072ES Скачать руководство пользователя страница 49

"3072ES / 3772ES / 3772ES HD" Service & Parts Manual

October 2008

Page 2-11

ART_2558

DRIVE

ENABLED

HOLD SW

ITCH IN

DESIRED DIRECTION

AUTOMA

TIC

OUTRIGGER

S

RETRACT

EXTEN

D

91349

7156

Emergency

Stop

Joystick

Enable

Bar

Mode Switch

Lift / Drive

Steering

Speed / Torque

Drive Enabled

Indicator

(Optional)

Horn

(Optional)

Outrigger

Extend/Retract 

(HD Models)

Keyswitch

Off/On

Upper Controls

To operate the machine using the upper
controls, the selector switch on the lower
control must be set to PLATFORM.

Key Switch

Turn the key switch ON to operate the ma-
chine. Turn the key switch OFF and remove
the key to shut down and prevent unautho-
rized use.

MODE SELECT Switch

Type of switch: 1-pole 2-position toggle switch.
Used to set operation of the joystick to LIFT or
DRIVE.

SPEED / TORQUE Switch

Type of switch: 1-pole 3-position toggle switch. Used to set drive speed. When the machine is el-
evated above 10 feet (3 m), the switch defaults to MID RANGE no matter what position the switch is
in.

HORN Button (option)

Type of switch: momentary push button. Press to sound the horn.

Joystick

Type of switch: proportional control.

LIFT: With the Mode Select switch set to LIFT, squeeze the Enable bar and pull back on the

Joystick. Lift speed is controlled by the amount that the Joystick is pulled.

Push forward on the Joystick to lower the platform. It is not necessary to squeeze the Enable
bar and the rate of descent is not variable.

DRIVE: With the Mode Select switch set to DRIVE, squeeze the Enable bar and move the Joy-

stick forward to drive forward, or move the Joystick backward to drive in reverse. Drive speed is
controlled by the amount that the Joystick is moved.

Enable Bar

Type of switch: momentary button. Squeeze the bar to activate the joystick LIFT, DRIVE, and STEER
functions. It is not necessary to squeeze the Enable bar to lower the platform.

Steering Rocker Switch

Type of switch: momentary rocker. Squeeze the Enable Bar and press the Steering switch with your
thumb to activate the steering cylinder and turn the front wheels.

AUTOMATIC OUTRIGGERS Switch (option)

Type of switch: 2-pole 2-position momentary toggle switch. Push down and hold the switch to lower
the outriggers. Lift up and hold the switch to raise the outriggers.

DRIVE ENABLED Indicator (option)

The indicator light is ON when all four outriggers are fully raised and it is safe to drive the machine.
The machine will not drive if the indicator light is OFF.

Содержание 3072ES































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды