Mec 1330SE Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 84

Mec 1330SE Скачать руководство пользователя страница 29

Page 25

1330SE - Servce & Parts Manual

November 2021

Secton 10 - Mantenance

Clean up any oil that may have spilled. Properly discard the used oil.
Clean the inside of the hydraulic tank using a mild solvent. Allow the tank to dry completely.
Install the hydraulic tank and install and tighten the hydraulic tank retaining fasteners.

Hydraulic Tank Retaining Fasteners, Dry

35 in-Ibs / 4 Nm

Hydraulic Tank Drain Plug, Lubricated

26 in-Ibs / 3 Nm

Install the hydraulic power pack into the component tray. Install the fitting and hydraulic hoses
onto the hydraulic power pack and torque.
Fill the tank with hydraulic oil to the middle of the dipstick. Do not overfill.
Activate the pump to fill the hydraulic system with oil and bleed the system of air.

COMPONENT DAMAGE HAZARD. THE PUMP CAN BE DAMAGED
IF OPERATED WITHOUT OIL. BE CAREFUL NOT TO EMPTY THE
HYDRAULIC TANK WHILE IN THE PROCESS OF FILLING THE
HYDRAULIC SYSTEM. DO NOT ALLOW THE PUMP TO CAVITATE.

7.
8.
9.

10.

11.
12.

«
...
27
28
29
30
31
...
»

Содержание 1330SE





















































































Отзывы:

Нет отзывов